To be assembled in SJ413 and Samurai 413 (G13A engines).Delivered with its seal.
Coolant reserve for all Suzuki and Santana Samurai sj410, sj413, petrol.Cap included.
Diameter : 10mm Thread : 0.85mmQuality: original
82°c / 179,6°F water thermostat.To be assembled on Santana and Suzuki 410 and 413 with an 8 valves engine.Seal included.
Upper cooling hose for Santana and Suzuki 413, 8 valves.To be assembled between the radiator and the thermostat case.
Lower cooling hose for Santana and Suzuki 413, 8 valves.To be assembled between the radiator and the metal sleeve.
Inferior cooling hose for Santana and Suzuki 413, 8 valves. To be assembled between the metal sleeve and engine block.
Suitable for all Jimny and Samurai, petrol, 1.3L, 16 valves.Seal included.
Heater hose for Suzuki 410 and 413.To be assembled between the heating radiator and the heatin tap.
Heater hose for Suzuki samurai 410 and 413. To be assembled between the heating radiator and the heatin tap.Quality: original
Heater hose for Santana and Suzuki Samurai 413.To be assembled between the heating radiator and the intake.
Viscous coupling for Suzuki and Santana 413, 8 valves.To be assembled between the propeller and the water pump.
Square radiator plug For Suzuki or Santana 410 and 413, petrol.Quality: original
Radiator cap for Suzuki or Santana 410 and 413, petrol.
This kit allows you to assembled the fan triggering sensor directly on the hose.Includes :- 1 sensor support connecting sleeve for 32 to 40mm interior diameter hose.- 1 97/92° thermal contact sensor.- 1 2 wires connector (2mm²).
82° water thermostat.To be assembled on Santana, Suzuki Jimny and 413 with a G13BB, 16 valves engine.Seal included.
Metal tube for Suzuki, Santana 413 with a 1.3L, 8 valves, engine. To be assembled on the engine block between the water pump and the bottom coolant hose.
Metal tube seal for Suzuki Santana 413 with a 1.3L, 8 valves.
To be assembled on the water pump of Suzuki Santana Samurai 413 (with a G13BB engine) 4WD.
Metal cooling tube with fixing foot.To be assembled between the radiator’s bottom coolant hose and the cooling tube’s hose.Suitable for Suzuki, Santana 413 4WD with a 1.3L, 8 valves, engine.Quality : origin.
To be assembled on all Suzuki Santana Samurai (left-hand drive).
To be assembled on SJ413 and Samurai with a G13A engine.
To be assembled between the thermostat and the top coolant hose. Suitable for Suzuki or Santana 410, 413, Samurai G13A and Vitara G16A
Purchase a gift voucher
Gift Vouchers MASTERFOREST - Pièces détachées et accessoires 4x4 SUZUKI et SANTANA