Delivered with 95 teeth belt and tensioner.To be assembled on G16A engine (1600 with carburettor) and G16BA engine (1600 with single-point injection).
Seal for drain plug. Diameter : 14mm
Electrical submerged fuel pump (support not included).Suitable for Santana and Suzuki Vitara, injection.
To be assembled between the cylinder head and the ignition casing of Suzuki Santana Vitara 4WD with a G16A (1600 with carburettor) or G16BA (single-point injection) engine.
Camshaft for petrol Suzuki and Santana Vitara 4WD (1.6L, 8 valves) with a G16A engine.
Locks the pulley on the crankshaft.
Drives the alternator and the water pump/ventilator.Dimensions : 4PK800.
To be assembled on G16A (1600 with carburettor) and G16BA (1600 single-point injection).
Brand according to availability. To be assembled on Suzuki Vitara 4WD.- 1.6 (ET) 82 CV - from 1988/07 to 1991/12- 1.6 (TA) 80 CV - from 1988/07 to 1998/03
Reservoir tank cap for all petrol Suzuki Santana Vitara 4WD.
Drives the power steering.Dimensions: 4PK810.
To be assembled on G16BB (1600, 16 valves) engines.
Brand according to availability. To be assembled on Vitara 4WD.- 1.6 16V (ET) 97 CV – from 1990/07 to 1999/03- 2.0 16V (ET) 132 CV – from 1996/12 to 1999/03
Paper gasket to be assembled between the single-point bloc and the intake manifold.To be assembled on Suzuki or Santana Vitara 1.6L, 8 valves 4WD, single-point.
Complete ignition distributor (see picture).Suitable for single-point injection Suzuki Vitara (clipped distributor cap).
Complete set of seals and gaskets to refurbish the engine head. To be assembled on G16A engines.Cylinder head gasket included.
Screwed model.To be assembled on Suzuki and Santana Vitara with a 16 valves, G16BB engine.
To be assembled on all Suzuki Santana Vitara, 8 valves, with a G16A engine.
Suitable for 8 valves Suzuki and Santana Vitara with a G16A engine.
To be assembled between the cylinder head and the exhaust manifold.To be assembled on petrol Suzuki or Santana Vitara (1600cm3, 8 valves) with a G16A engine.
Purchase a gift voucher