Essentiel drop arm to hold the road well with suspension lifts. Allows to lower the fixation point of 7,5cm (27,5'') on the steering box. Suitable for all Suzuki Santana Samurai and petrol Jimny (1998-2018) with power steering.
Authentic, ultra-reliable ARB tyre lock. 5 year guarantee. 26 grooves side gear. Fastest on the market. To be assembled in the rear of all Jimny petrol from 1998 to 2004 and all diesel Jimny. Delivered complete with its accessories (control button, solenoid valve, wire harness…) Compressor not included.
Steel MF bumpers for petrol Suzuki Jimny from 1998 to 2018, with space for long range lights. WR6000 winch support plate included (only for models without air conditioning). Equipped with shackle supports. Compatible with body lifts and bodyshell raises. Winch, long range lights and shackles not included.
Protects the front or rear axle. Product to glue on the axle housing. Material : 5mm, electrogalvanized, steel. Specific glue cartridge (to use with a glue gun) included. Suitable for Suzuki Jimny (1998-2018) and Santana Samurai 410, 413, petrol and diesel.
Bucket seat made in black fabric adapted to all vehicles. Reclining seat with the lever on the left side. Dimensions / A : 960mm / B : 550mm / C : 510mm / D : 535mm / E : 465mm Universal seat runner kit is included. Seat subframes not included (available for Suzuki or Santana, Samurai and Jimny). Seat subframes not available for Vitara and Jimny 2018+
Aviation type brake hose.Color : blackInternal diameter : 3.5mmExternal diameter : 6.45mmPrice per meter.
Threading : 7/16x20UNFSold by pair.
MF hydraulic parking brake, with « parking » position.Allows you to keep the parking brake when assembling rear disc brakes.New unlocking system, perfect controlling for all terrain with its grip handle.Master cylinder with its screws and seals included (cf.picture).
Chromoly 4340 reinforced cardans kit, 26 grooves side gear RCV performance black series. Much more hard-wearing than the original, this kit is perfect for an extreme all-terrain use. Suitable for Suzuki and Santana Jimny (1998-2018), petrol and diesel. This kit includes : 2 CV joints and 2 wheel shafts.
These gears reduce the ratio of your transfer case by 24% in both high and low speeds, they are a straight swap for your old gears, and fit all jimny manual transfer cases (98-05). Ratios : 1.63 : 1 high range and 2.65 : 1 low range. Doesn’t require the replacement of the original chain.
This kit allows you to fasten 1600cm3 G16BB Vitara engines on the frame of petrol Suzuki Jimny 4WD with a G13BB engine (1998-2018). Motor drive, specific bolts and assembly instructions included.
Wheel spacer for Suzuki 4WD (Samurai, Jimny and Vitara).Sold in pairs (for two wheels).Thickness : 30mmInteraxial :139.7Material : aluminium Nuts included.
ARB compressor for differential lock only. 0 psi output : 27,7L/min 29 psi output : 19,7L/min Delivered with its accessories (electrical wire harness, control button…)
Steel MF bumpers for petrol or diesel Suzuki Jimny (from 1998 to 2018), with space for long range lights. Compatible with body lifts and bodyshell raises. Optimal protection : Black powder-coated steel, covered with a special bump and scrape resistant polyurethane protection ! Winch support, winch, long range lights and shackles not included.
Set of 4 radius arm mounting guards.Reinforced off-road conception.Material : 3mm, electrogalvanized, steel.Bolts and assembly instructions included.
Bucket seat made in black fabric adapted to all vehicles. Reclining seat with the lever on the right side. Dimensions / A : 960mm / B : 550mm / C : 510mm / D : 535mm / E : 465mm Universal seat runner kit is included. Seat subframes available for Suzuki, Santana, Samurai and Jimny. Seat subframes not available for Vitara.
Zinc-coated steel banjo fitting.Internal diameter : 10mm
Hydraulic parking brake master cylinder for MF handle.Sold individually.Nut and fastening U included (cf.picture).
Snorkel for Suzuki and Santana Jimny, petrol before 2018. Delivered with its cyclonic head, clamps and screws.
Reinforced shock absorber for Suzuki and Santana sj410, 413, Samurai, Jimny, petrol and diesel.Fastening kit included.
These gears reduce the ratio of your transfer case by 15% in both high and low speeds, they are a straight swap for your old gears, and fit all jimny manual transfer cases (98-05). Ratios : 1.52 : 1 high range and 2.46 : 1 low range. Doesn’t require the replacement of the original chain.
MF Winch support, and steel bumper shackles for petrol Suzuki Jimny (only for models without air conditioning).Compatible with bodylifts and bodyshell raises.5mm black powder-coated steel plate.Low guard plate in aluminium.Winch and shackles not included.Nuts, bolts and assembly instructions included.
Zinc-coated steel fitting.Threading : 10x100.End : concave.
Protects the front or rear drive axle.Raw product to be welded and to paint on the axle housing.5mm steel.Suitable for Suzuki Jimny and Santana Samurai 410, 413, petrol and diesel
Purchase a gift voucher