Standard quality rear wheel roller bearing kit for all suzuki and santana, 410, 413, gas and diesel 4WD. To be assembled on the rear, right or left. Delivered with race and seal.
Original quality rear wheel enhanced roller bearing kit for Suzuki and Santana 410, 413, gas and diesel.To be assembled on the rear right or left.Rings and seals included.
To be assembled on the rear right or left. Dimensions: 62mm x 48mm x 9mm
Rear wheel roller bearing protection ring.Sold individually.
Rear axle bump stops.To be assembled on all santana sj410, sj413 and samurai, gas or diesel.Sold in pair.
Not suitable for narrow axle 410. To be assembled at the entrance of the differential carrier to render it hermetic.Dimensions : 72mm x 40mm x 11mm.
Exterior roller bearing for the differential carrier’s drive pinion.To be assembled in the front or rear differential carrier.Original quality.
Interior drive axle nose pinion roller bearing. To be assembled in the front or rear drive axle nose. Quality: original
To be assembled in between the two drive pinion roller bearings, in the front or rear drive axle nose.Original quality.
Interior roller bearing for the differential carrier’s drive pinion.To be assembled in the front or rear differential carrier.Original quality.
To be assembled on all Suzuki Santana Samurai gas and fiesel 4WD, EXCEPT narrow axle 410. For mounting with M8 screws. Quality: original
Set of 4 differential pinions and 2 26 grooves sun gears.Allows 26 grooves wheel shaft assembly.To be assembled on Suzuki Samurai Jimny or Samurai sj 410 413, petrol and diesel.
Front or rear axle breather valve kit for Suzuki Santana 410, 413, Samurai and Jimny 4WD.Plug and valve included.
Original wheel axle for Wide Suzuki or Santana ; 410, 413, Samurai, petrol, diesel and turbo diesel. To be assembled in the rear axle, driver side. Delivered with its 4 threaded studs. Bearing not included.
Original wheel axle for Wide Suzuki or Santana ; 410, 413, Samurai, petrol, diesel and turbo diesel. To be assembled in the rear axle, passenger side. Delivered with its 4 threaded studs. Bearing not included.
Rear axle housing for wide Suzuki or Santana Samurai 410, 413, petrol and diesel.May require small modifications depending on your braking assembly.Delivered bare, without any element or oil drain plug.Model : cf.picture.
Adjustment strut for wide Suzuki or Santana 410, 413, petrol, diesel, samurai.To be assembled between the differential and the crown ring and pinion gear’s great drive gear.Thickness : 2mm.
4 pieces necessary by drum.Rover washer included.Sold individually.
To be assembled on the front or rear differential carrier of all petrol, diesel and turbodiesel Suzuki Samurai 4WD, EXCEPT narrow 410.Refurbishment kit, including :4 roller bearings10 great drive gear fixing screws1 jackstay1 radial shaft seal6 adjustement washers1 nutQuality : origin.
To be assembled on the rear axle of 16 valves petrol, diesel and turbo diesel Suzuki Santana Samurai 4WD.Crown Ring and Pinion Gear : 12:41Delivered complete and adjusted, ready for assembly.
To be assembled on all petrol and diesel Suzuki Santana Samurai 4WD.
3.42 ration crown ring and pinion gear with :- 1 driver gear with 12 teeth- 1 crown ring with 41 teethTo be assembled on the front or rear of all petrol and diesel Suzuki and Santana Samurai 4WD, except narrow 410.
Purchase a gift voucher
Gift Vouchers MASTERFOREST - Pièces détachées et accessoires 4x4 SUZUKI et SANTANA