Delivered with 95 teeth belt and tensioner.To be assembled on G16A engine (1600 with carburettor) and G16BA engine (1600 with single-point injection).
Complete towbar for 3 doors, first generation Suzuki and Santana Vitara 4WD : - Screws and bolt - Towball and its cover - 7 pin socket with wire harness - Haulage : 1450 Kg - Assembly instructions
To be assembled on petrol Suzuki Santana Vitara 4WD with a carburettor.
To be assembled on first generation Suzuki Santana Vitara 4WD with a 1600cm3 petrol engine.Seal included.
To be assembled on first generation Suzuki Santana Vitara 4WD.Raw product to paint.Logo not included.Quality : adaptable.
Non ventilated model.Diameter : 290mm.Thickness : 10mm.Centric diameter : 107 mmSold in pairs.Suitable for petrol and diesel Suzuki and Santana Vitara.
Windscreen washer reservoir tank seal. To be assembled on Suzuki Santana Vitara 4WD. Quality: original
Sold individually.Internal diameter : 228mm.Internal width : 49.5mm.
Snorkel for 1,6L petrol Suzuki Santana Vitara 4WD. Assembly on the left wing.Delivered with its head, clamps and screws.
Master brake cylinder with 2 right outputs and 1 left output.To be assembled on petrol Suzuki and Santana Vitara.Vessel not included.
Left steering ball joint (driver side).
Electrical submerged fuel pump (support not included).Suitable for Santana and Suzuki Vitara, injection.
To be assembled between the exhaust manifold and the primary tube of petrol Suzuki Santana Vitara 4WD. Quality : adaptable
To be assembled between the cylinder head and the ignition casing of Suzuki Santana Vitara 4WD with a G16A (1600 with carburettor) or G16BA (single-point injection) engine.
Suitable for petrol, diesel and turbo diesel Suzuki Santana Vitara 4WD. Quality: original
Rear roller bearing protection ring.Sold individually.
Technical review (in french) on driving and maintaining Suzuki and Santana Vitara 4WD, petrol and diesel. Perfect to do your own repairs.
Right-hand mirror for Suzuki Santanan Vitara 4WD.Manual adjustmentQuality : adaptable
To be assembled on 8 valves, petrol, Suzuki or Santana Vitara 4WD.Power : 12 voltsNew product. You don’t need to return your old starter.
Wheel spacer for Suzuki 4WD (Samurai, Jimny and Vitara).Sold in pairs (for two wheels).Thickness : 30mmInteraxial :139.7Material : aluminium Nuts included.
These 3 pinions (4.24:1) enables the simple reduction of the speed ratios by 134% on low speeds.Suitable for the transfer cases of petrol, 1.6L, Suzuki Vitara 4WD, from 1991 to 1998.Caution : it is necessary to grind the sump’s inside in order to make place for the bigger pinions !
Purchase a gift voucher
Gift Vouchers MASTERFOREST - Pièces détachées et accessoires 4x4 SUZUKI et SANTANA