This rear disk brake semi-kit was conceived to resist extreme conditions.Its square, axle like form, machining allows the fastening screws to not be severed during intense brakings. To be assembled on Suzuki and Santana samurai, petrol and diesel 4WD.This kit requires to have suzuki samurai front disks and calipers (not included)
Aviation type, reinforced brake flexible.To be assembled on the front left, on post 1998 models.Total length : 600mm.Fitting : bango/female.
Aviation type brake hose.Color : blackInternal diameter : 3.5mmExternal diameter : 6.45mmPrice per meter.
Aviation type, reinforced brake flexible.To be assembled in the rear.Total length: 440mm.Fitting: male/male.
Complete Girling brake caliper kit.To be assembled in the front of Suzuki and Santana Samurai sj410 and 413, petrol or diesel.Also suitable for rear disc brake kit FREP03.This kit includes :- 2 brake calipers (right and left) + their 2 supports.- 1 set of brake pads.- 2 flexible screws with seals.- 4 caliper screws with washers.
Zinc-coated steel banjo fitting.Internal diameter : 10mm
Aviation type brake flexible (reinforced).To be assembled in the front of Suzuki or Samurai 410, 413, petrol and diesel.Total length : 380mm.Fitting : male/banjo.
Brake pads for FREP05 brake calipers.Sold by 4.
Zinc-coated steel fitting.Threading : 10x100.End : concave.
This complete kit of rear disc brakes has been conceived to resist to extreme conditions. Its processing, reminding us of the axle’s square forms, allows for intense braking without the fastening screws severing. To be assembled on Suzuki and Santana, petrol and diesel. This kit includes : - 2 complete brake calipers with pads + mounting plates. - 2 brake...
Off-road caliper repair kit.Includes : - 1 piston- 1 seal- 1 dust cap- 2 sliding block boot- 1 bleeding plug
Zinc-coated steel screw.Threading : 3/8x24UNF.
Diameter : 290mm.Thickness : 10mm.Centric diameter : 107 mmSold in pairs.Suitable for all diesel and petrol Suzuki and Santana Samurai sj410, sj413, 410, 413.
Zinc-coated steel screw.Threading : 7/16x20UNF.
MF hydraulic parking brake, with « parking » position.Allows you to keep the parking brake when assembling rear disc brakes.New unlocking system, perfect controlling for all terrain with its grip handle.Master cylinder with its screws and seals included (cf.picture).
Zinc-coated steel double banjo fitting.Internal diameter : 7/16’’2 outputs.
Hydraulic parking brake master cylinder for MF handle.Sold individually.Nut and fastening U included (cf.picture).
Internal diameter : 7/16’’External diameter : 17.4mmWidth : 1.27mm
Purchase a gift voucher
Gift Vouchers MASTERFOREST - Pièces détachées et accessoires 4x4 SUZUKI et SANTANA