Delivered with 95 teeth belt and tensioner.To be assembled on G16A engine (1600 with carburettor) and G16BA engine (1600 with single-point injection).
Voltage : 12VPower : 5WECE norm.W5W model.Sold individually.
Complete towbar for 3 doors, first generation Suzuki and Santana Vitara 4WD : - Screws and bolt - Towball and its cover - 7 pin socket with wire harness - Haulage : 1450 Kg - Assembly instructions
Diameter : 6 mmThread : 100Sold individually.
To be assembled on petrol Suzuki Santana Vitara 4WD with a carburettor.
To be assembled on first generation Suzuki Santana Vitara 4WD with a 1600cm3 petrol engine.Seal included.
To be assembled on first generation Suzuki Santana Vitara 4WD.Raw product to paint.Logo not included.Quality : adaptable.
Suitable for a build with a XUD9 diesel Peugeot engine.Dimensions : 210mm x 260mm
Non ventilated model.Diameter : 290mm.Thickness : 10mm.Centric diameter : 107 mmSold in pairs.Suitable for petrol and diesel Suzuki and Santana Vitara.
Windscreen washer reservoir tank seal. To be assembled on Suzuki Santana Vitara 4WD. Quality: original
Seal for drain plug. Diameter : 14mm
To be assembled on the rear right and left. This model should be fixed on the top of the crank web.Sold individually.
Sold individually.Internal diameter : 228mm.Internal width : 49.5mm.
Snorkel for 1,9L diesel and turbo diesel Suzuki Santana Vitara 4WD. Assembly on the right wing.Delivered with its head, clamps and screws.
Snorkel for 1,6L petrol Suzuki Santana Vitara 4WD. Assembly on the left wing.Delivered with its head, clamps and screws.
Master brake cylinder with 2 right outputs and 1 left output.To be assembled on petrol Suzuki and Santana Vitara.Vessel not included.
Damper pulley for Suzuki or Santana Vitara with a 1.9L Peugeot engine (XUD diesel and turbo diesel).To be assembled on the crankshaft, timing side.
Left steering ball joint (driver side).
Electrical submerged fuel pump (support not included).Suitable for Santana and Suzuki Vitara, injection.
To be assembled between the exhaust manifold and the primary tube of petrol Suzuki Santana Vitara 4WD. Quality : adaptable
To be assembled between the cylinder head and the ignition casing of Suzuki Santana Vitara 4WD with a G16A (1600 with carburettor) or G16BA (single-point injection) engine.
Suitable for petrol, diesel and turbo diesel Suzuki Santana Vitara 4WD. Quality: original
Rear roller bearing protection ring.Sold individually.
Technical review (in french) on driving and maintaining Suzuki and Santana Vitara 4WD, petrol and diesel. Perfect to do your own repairs.
Purchase a gift voucher