Diameter : 290mm.Thickness : 10mm.Centric diameter : 107 mmSold in pairs.Suitable for all diesel and petrol Suzuki and Santana Samurai sj410, sj413, 410, 413.
Lucas build, brake master cylinder. 2 right outputs. To be assembled on Suzuki and Santana 413. Quality: original
Assembly for 228mm diameter drums, with wheel cylinder assembled on the high part of the brake support flange. Complete pre-assembled kit (cf. picture).Fastening springs included.
Suitable for Suzuki Santana 410, 413, petrol and diesel.Model : cf. picture.Sold in sets of 4.
Japanese build. Suitable for brake systems without power-assist. 2 11x100 left side outputs.
Assembly for 228mm diameter drums, with wheel cylinder assembled on the bottom part of the axle flange. Complete pre-assembled kit (cf. picture).Fastening springs included.
Suitable for petrol Samurai and Jimny (cf. picture).Sold in sets of 4.
Japanese build. Suitable for brake systems without power-assist. 2 10x100 left side outputs.
Rear brake kit, top build, Suzuki Santana SamuraiFor 228 diameter brake drums build with wheel cylinder fixed on the top of the crank web.Kit composed of :- 2 Top wheel cylinders- 1 set of 4 rear brake shoes- 1 set of springs for brake shoes buildBrakes linings adjuted not included.
Sold in sets of 4. To be assembled on some Suzuki and Santana Samurai 4WD. Model : cf. picture.Length : 131.5mm.
Japanese build. Suitable for brake systems with power-assist. 2 10x100 left side outputs. Model without a level indicator.
For 228 diameter brake drums build with wheel cylinder assembled on the bottom part of the axle flange. Kit composed of :-2 bottom wheel cylinders- 1 set of 4 rear brake shoes- 1 set of springs for brake shoes buildBrakes linings adjuted not included.
Japanese build. Suitable for brake systems with power-assist. 2 10x100 left side outputs. Model without a level indicator.
Refurbishment kit for an AISIN brake caliper, composed of : - 1 51mm diameter piston. - 1 seal. - 1 dust cap and its fastening clip. - 1 dose of grease for assembly. Quality: original
Piston seals kit for AISIN brake caliper, composed of: - 1 seal for a 51mm diameter piston. - 1 dust cap and its fastening clip. - 1 dose of grease fr assembly. Quality: original
Girling build, brake master cylinder.Low outputs.To be assembled on Suzuki and Santana 413.
AISIN brake caliper seal kit :- 1 51mm diameter piston seal- 1 dust cap and its fastening clip.- 1 bleeding plug.- 4 sliding dust boot
To be assembled on the rear part of the right frame rail. Quality: original
Total length: 315mm. Fitting: banjo/male.
Springs kit for left and right rear brakes build.To be assembled on petrol and diesel, Suzuki Santana Samurai 410, 413 4WD.
To be assembled on the rear right and left. This model should be fixed on the bottom of the flange. Sold individually.
Purchase a gift voucher
Gift Vouchers MASTERFOREST - Pièces détachées et accessoires 4x4 SUZUKI et SANTANA