Lift shackles kit.Allows you to raise your 4WD very easily.Sold in pair with nuts and bolts.Interaxial : 110mmFinish : black epoxy paint.
Front axle bump stop.Sold by pair.To be assembled on all Santana, sj410, sj413 and samurai gas or diesel.
14 parts, spring leaves bushing kit.Complete kit for front or rear axle housing.Jackstay included.
40 mm bodyshell raise for Suzuki Santana Samurai 410, 413, gas and diesel 4WD.Screws and bolts included (cf. picture).
Old Man Emu leaf spring.Raises the vehicle of about 5cm (depending on your equipment).Assembly : front.Load : medium.Sold individually.
Front U-bolt fastening kit.Nuts included.To be assembled on all Santana and Suzuki Samurai, petrol or diesel models, EXCEPT narrow axle sj410.Sold by 4.
Rear, petrol, Old Man Emu shock absorber.Max interaxial : 495mmMinimum interaxial : 305mmSold individually.
Drop shafts are essential in order to hold the road well with suspension lifts.Allows to lower the fixation point of 7,5cm (27,5'') on the steering gear.Suitable for all Suzuki Santana without power steering.
Standard, flexible 2" Suzuki Santana Samurai leaf springs (tested and approved in competition). Adjustable shock absorbers for a multipurpose vehicle. Efficient on road, trail or off-road. Suitable for all Suzuki and Santana samurai 410, 413 petrol 4WDwithout a heavier load than the original. The change of brake hoses is not required.
MF coil suspension lift kit, +5cm flexible lift. To be assembled on short framed Suzuki and Santana 410 or 413, petrol and diesel. Replaces leaf springs with coil springs. Increases considerably the suspension’s displacement amplitude and the comfort of your 4WD. Fastening anchor point to be welded on the frame. Rigidity : flexible.
Suspension spring for MF spiral kit.Length : 25cm.Internal spiral diameter : 6,5cmRigidity : flexible.Sold individually.
To be welded on tubes with an internal diameter of 32mm. Thread : 1’’ - 14 / 25,4mm diameter and 14 threads per inch.
Perfect steel tube for suspension axle rod.Internal diameter : 32mmExternal diameter : 42mmLength: 1m
67mm ball joint with grease nipple, to be screwed. Thread : screw thread on the right 1’’ - 14 / 25,4mm diameter and 14 threads per inch. Screw hole diameter : 14mm Working angle : 30°
67mm ball joint with grease nipple, to be welded. Screw hole diameter : 14mm Working angle: 30°
Silent bloc, to weld, for spiral suspension kit. External diameter : 45mm Axis diameter : 12mm Total length : 77mm Sold individually.
Adjustable MF gas shock absorber. Specially conceived by Profender, the great off-road suspension brand, for Suzuki 4WD ! Adjsutment wheel for 4 different hardness settings. To be assembled on Santana sj 410 and 413, samurai, petrol and diesel, equipped with the MF spiral kit with +5, +10 or +15cm lift. Delivered with its black protection boot....
Lift shackles kit.Allows you to raise your 4WD very easily.Sold in pairs with nuts and bolts.Interaxial: 130mmFinish : black epoxy paint.
Essentiel drop arm to hold the road well with suspension lifts. Allows to lower the fixation point of 7,5cm (27,5'') on the steering box. Suitable for all Suzuki Santana Samurai and petrol Jimny (1998-2018) with power steering.
Rear axle bump stops.To be assembled on all santana sj410, sj413 and samurai, gas or diesel.Sold in pair.
Complete silent blocs kit : 34 pieces.To be assembled between the frame and the bodyshell.Delivered with its support washer.
Old Man Emu leaf spring.Raises the vehicle of about 5cm (depending on your equipment).Assembly : front.Load : heavy.Sold individually.
Front, petrol Old Man Emu shock absorber.Max interaxial : 495mmMinimum interaxial : 310mmSold individually.
Rear leaf springs’ U-bolt set. Nuts included. Sold by 4. To be assembled on Santana and Suzuki Samurai, petrol or diesel, EXCEPT narrow sj410.
Purchase a gift voucher
Gift Vouchers MASTERFOREST - Pièces détachées et accessoires 4x4 SUZUKI et SANTANA