Indispensable for off road use.Protects your fuel tank, dipstick and petrol pump from shocks.May be assembled on all Suzuki, Satana, sj410, sj413, samurai, petrol and diesel.Reinforced design with reinforcing folds on the sides.Drainage holes on the back.Light and resistant protective shield in quality aluminium.To be assembled on the original supports,...
Lift shackles kit.Allows you to raise your 4WD very easily.Sold in pair with nuts and bolts.Interaxial : 110mmFinish : black epoxy paint.
Masterforest exclusivity.Steel off-road bumper with all models winch plate.Suitable for all Suzuki and Santana samurai sj 410, 413 before 1999.High quality black epoxy paint finish.Bolts includedWinch, shackles and indicators/side lights assembly are not included.
14 parts, spring leaves bushing kit.Complete kit for front or rear axle housing.Jackstay included.
Essentiel drop arm to hold the road well with suspension lifts. Allows to lower the fixation point of 7,5cm (27,5'') on the steering box. Suitable for all Suzuki Santana Samurai and petrol Jimny (1998-2018) with power steering.
40 mm bodyshell raise for Suzuki Santana Samurai 410, 413, gas and diesel 4WD.Screws and bolts included (cf. picture).
Rear axle bump stops.To be assembled on all santana sj410, sj413 and samurai, gas or diesel.Sold in pair.
Aviation type, reinforced brake flexible.To be assembled on the front left, on post 1998 models.Total length : 600mm.Fitting : bango/female.
Authentic, ultra-reliable ARB tyre lock. 5 year guarantee. 22 grooves side gear. Fastest on the market. To be assembled in the front of all Samurai, petrol and diesel, EXCEPT narrow 410. Delivered complete with its accessories (control button, solenoid valve, wire harness…) Compressor not included.
Rear leaf springs’ U-bolt set. Nuts included. Sold by 4. To be assembled on Santana and Suzuki Samurai, petrol or diesel, EXCEPT narrow sj410.
Chromoly 4340 reinforced cardans kit, 26 grooves side gear RCV performance black series.Much more hard-wearing than the original, this kit is perfect for an extreme all-terrain use.Suitable for Suzuki and Santana Samurai, petrol or diesel, EXCEPT narrow 410 and 413.This kit includes : 2 CV joints and 2 axle shafts.
This transfer case’s short pinions kit is perfect to get some power back with big wheels (cf. chart). Remember to change the BDT06 overhaul kit. Suitable for all Suzuki and Santana Samurai 413, petrol, diesel and turbo diesel, cases.
5.38 Crown ring and Pinion gear. Includes : - 1 8 teeth drive pinion. - 1 43 teeth crown ring. To be assembled on the front or rear of Suzuki and Santana Samurai 4WD, petrol and diesel, EXCEPT narrow 410.
This complete kit of rear disc brakes has been conceived to resist to extreme conditions. Its processing, reminding us of the axle’s square forms, allows for intense braking without the fastening screws severing. To be assembled on Suzuki and Santana, petrol and diesel. This kit includes : - 2 complete brake calipers with pads + mounting plates. - 2 brake...
Bucket seat made in black fabric adapted to all vehicles. Reclining seat with the lever on the left side. Dimensions / A : 960mm / B : 550mm / C : 510mm / D : 535mm / E : 465mm Universal seat runner kit is included. Seat subframes not included (available for Suzuki or Santana, Samurai and Jimny). Seat subframes not available for Vitara and Jimny 2018+
Aviation type brake hose.Color : blackInternal diameter : 3.5mmExternal diameter : 6.45mmPrice per meter.
Threading : 7/16x20UNFSold by pair.
MF coil suspension lift kit, +5cm flexible lift. To be assembled on short framed Suzuki and Santana 410 or 413, petrol and diesel. Replaces leaf springs with coil springs. Increases considerably the suspension’s displacement amplitude and the comfort of your 4WD. Fastening anchor point to be welded on the frame. Rigidity : flexible.
Suspension spring for MF spiral kit.Length : 25cm.Internal spiral diameter : 6,5cmRigidity : flexible.Sold individually.
To be welded on tubes with an internal diameter of 32mm. Thread : 1’’ - 14 / 25,4mm diameter and 14 threads per inch.
Perfect steel tube for suspension axle rod.Internal diameter : 32mmExternal diameter : 42mmLength: 1m
67mm ball joint with grease nipple, to be screwed. Thread : screw thread on the right 1’’ - 14 / 25,4mm diameter and 14 threads per inch. Screw hole diameter : 14mm Working angle : 30°
67mm ball joint with grease nipple, to be welded. Screw hole diameter : 14mm Working angle: 30°
Silent bloc, to weld, for spiral suspension kit. External diameter : 45mm Axis diameter : 12mm Total length : 77mm Sold individually.
Purchase a gift voucher